Project Penicillin~ 68 crewcab build up!

[Rokcrln]

Well to start with the front dimple is for the front corner of the kick panel.

I do not expect any after market sheet metal patch part to fit right out of the box. I plan time to re-work every part. Do not think it is one company over another as they are all about the same. Some part fit great one time and not th enext and they may be from the same co. and labled the same.

As far as rocker fitment to the front A post they all fit up short. If you want a perfect fit (full show truck or somthing) you will need to by 2 rocker and section them to fit just right. Also alot of the time you will need to section the threshold area to get a factory gap along the bottom of the door. Now 95% of the time you can get one rocker to work just fine with a bit of hammer and dolly work.

Last as far as the third rocker goies I can not tell you how it fits because this truck was cut in the middle of the door opening and a truck cab was grafted on. As I am re-doing things I am working it al back to how it should have been done the first time.

Check back Saturday and Sunday and I should have the rest of the pass side done.

Kevin
LFD Inc.