![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: May 2006
Location: Destrehan, Louisiana
Posts: 23
|
About to do Serpentine swap. Have a few questions
Ok, I have the complete setup from a 1993 C1500 with a 5.7L. The only problem is, the only parts that are any good are the brackets because the donor vehicle was submerged by hurricane Katrina. Here is a list of the NEw parts I bought
New Tensioner and idler Compressor (For 93) Alternator (For 93) Water Pump (for 93) I'll deal with the wiring after I get it all put on Now here are my questions I have the A/C lines from the 93 will those work? Which dryer do I use? the one for My 84 or the one for a 93? Will my fan work with the reverse rotation water pump? Do I need to get a P/S pump too or will the one from my 84 work? The block/Heads is from a 97 pickup so there shouldn't be any bolting issues, I think. Also, if anyone wants to give some pointers they would be greatly appreciated. Thanks Chris ![]()
__________________
84 C10 Vortec 350, Turbo350, 12 Bolt w/3:73 14.42ET Soon to come 150 Shot |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|