I'm at a loss with this front end! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jimmydean · 09-21-2006, 02:12 PM

I am trying to do these spindles and nothing will come off! Looking at the walkthrough on Classic Trucks, it looks liike everything fell off once it was unbolted.

I have all the castle nuts removed from the tie rod end, upper and lower ball joints, but the thing won't budge! I am headed to Autozone for a puller even though one wasn't used in the walkthrough.

I have soaked everything in WD40 in hopes that would help. Any advise before I beat things to hell?

09-21-2006, 02:12 PM	#1
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	I'm at a loss with this front end! I am trying to do these spindles and nothing will come off! Looking at the walkthrough on Classic Trucks, it looks liike everything fell off once it was unbolted. I have all the castle nuts removed from the tie rod end, upper and lower ball joints, but the thing won't budge! I am headed to Autozone for a puller even though one wasn't used in the walkthrough. I have soaked everything in WD40 in hopes that would help. Any advise before I beat things to hell?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.