![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Apr 2004
Location: Oregon
Posts: 5
|
Need Some Help With 67 C10 Swaps Ideas
Greetings friends, it's been a while since I've had a chance to get here. I'm ready to make some changes on my 67 C10, and need some help deciding what should be simple questions. But, ones I don't know and have not been able to get answers to from local parts stores.
First of all, I noticed that the truck sits low in the left rear. Looked at springs, shocks all looks like everything else on the truck. Any ideas what may be causeing this? Then, I installed a Power Steering box from a 69 C10 using the 69 mount for the pump. Well, it's such a tight fit, that there is very little room for adjusting the belt. And, really hard to get at. Si there a better bracket or way to mount it for more adjustments? This also brings me to another Power steering question. The steering box I used came from the 69 also. And, it's so very slow that I wanted to know if anyone has used another faster ratio box that's on latyer applacations? Or, if I ordered a rebuilt one for say a later year truck, would it be faster lock to lock? I have a junk yard in my area that has a few of the older C/K series trucks left so I can also get used parts but once I kow what years were faster steering, the cost of a new rebuilt is only about $129.00. So then, a better bracket for the PS pump adjustment? And, faster ratio box for my 67 long bed. Small back window, and wood long bed. ![]() Good day friends, < Mike in Oregon >
__________________
Build It Fast Build It Right Hold On Tight !! |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|