Tell me if this is right? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72gmcshorty · 10-26-2002, 04:26 AM

After doing the switch over to HEI and cutting the original wiring, is there only one wire that now runs to the starter? I trimmed of the yellow that went to old distributor and am left with one purple that goes to starter. I know a red one goes from distributor into fuse panel. Where in the fuse panel does this wire go? Getting ready to start truck soon and work in the new cam, headers, intake and carb. Regarding cooling, I have a 454 motor and a new 4 core rad. Will a normal steel blade fan do the job cooling wise? Should I use a 70's style fan or a clutch type fan? Thanks for any help.

10-26-2002, 04:26 AM	#1
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	Tell me if this is right? After doing the switch over to HEI and cutting the original wiring, is there only one wire that now runs to the starter? I trimmed of the yellow that went to old distributor and am left with one purple that goes to starter. I know a red one goes from distributor into fuse panel. Where in the fuse panel does this wire go? Getting ready to start truck soon and work in the new cam, headers, intake and carb. Regarding cooling, I have a 454 motor and a new 4 core rad. Will a normal steel blade fan do the job cooling wise? Should I use a 70's style fan or a clutch type fan? Thanks for any help. __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.