T-5 vs Muncie 4 speed. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

firstgencamaros · 10-27-2002, 12:41 AM

Hello all,
Does anyone know what the length of a T-5 is compared to a muncie M-XX? I have a six cylinder and a 3 speed in my 68 shortbed now and think the T-5 would work out nice if the length is close to the same. Has anyone done this swap? The T-5 should bolt right up to the stock bellhousing, just switch out to a fine spline clutch disk. I am concearned about where the shifter will come through the floor. Any help on this would be great.
Thanks,

10-27-2002, 12:41 AM	#1
firstgencamaros Registered User Join Date: Sep 2002 Location: Gilbert, AZ Posts: 151	T-5 vs Muncie 4 speed. Hello all, Does anyone know what the length of a T-5 is compared to a muncie M-XX? I have a six cylinder and a 3 speed in my 68 shortbed now and think the T-5 would work out nice if the length is close to the same. Has anyone done this swap? The T-5 should bolt right up to the stock bellhousing, just switch out to a fine spline clutch disk. I am concearned about where the shifter will come through the floor. Any help on this would be great. Thanks, __________________ FGC

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.