Im re assembling a motor its 468 cubic inches for my 62 Wagon,its already a new motor but with stock componets.Ill be putting on the large oval port 049 Heads from a 73 454,and for nostalgia purposes i want to run the Edelbrock dual quad intake,with the 500 cfm carbs they come with the dual quad calibration kit,and have the linkage and fuel line.My dilemma is camshaft choice its recommends Performer Plus Cam Kit #2162 Adv Duration int 292 exh 302 int @.050 is 218 and 228 @exh @cam .295 both int and exh,valve both @.500 but i believe this is closer to a stock idle,id like a somewhat rough idle.please correct me if im wrong?or it recommends Torker Plus Kit but im not gonna be doing 2500-6500 rpm blasts.I like the RPM Cam sounds nastier but maybe not a good combo with intake? its Adv Duration is 300 exh 306 int@ .050 240 exh 246 cam@ .330 exh .337 valve int @ .560 exh .573 all this is in a very heavy car with 3.55 gears and a Turdo350 trans.maybe id be better off with just a RPM intake,but i really want the dual quad under the hood.Or a crossram if anyone has one!!!!!$$$i should probably stick to the Performer Plus recommendation,but i love that idle,but id rather have GO then sound/show.Anyone running any of the Edelbrock cams,or should i go with someone else.Ive had luck with the plain old Cranes.hmmm any suggests?
10-29-2002, 09:41 PM
Threaded Mode