|
Update on my 68 LS project.
I havent posted for awhile due to being super busy!!! I am in the middle of a move from Wichita Falls Texas to Phoenix Arizona. I was forced to hurry up and bolt what parts I have together so I could get the truck on the trailor to move it. The pics below are of the truck just bolted together. Ignore the body lines the truck has to come back apart to paint the frame (just Por15 right now), powder coat the spindles/brake calipers, run the brake lines, and paint the whole truck. You can see what I have done so far. The truck started as a low mileadge rust free long bed. I have shortened the frame, Z-ed the rear, shortened the bed, installed, disk brakes, drop spindles, 20 by 10's, and 18 by 8's, and the Geniii motor is just sitting in there. I have not decided if Im going to run the LS motor or a Duramax. Enjoy the pics. The first 2 pics are the truck stock.
__________________
68 lwb to swb Cummins swap in the works. I promise it will be cool someday.
Last edited by 68GenIII; 11-26-2006 at 06:43 PM.
|
11-26-2006, 06:36 PM
Threaded Mode