need some info on a cam - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jamon8 · 12-15-2006, 08:25 AM

summit has a bunch of cams avaliable

http://store.summitracing.com/egnsea...s=P%5FRank%7C0

as we all know summit does not make anything I bought sum-g5000 and I think it was made by crane

you can go with a low lobe seperation and have a choppy idle but unless do not have power brakes you will have problems with the amount of vaccum that is nessesary to stop and will have to buy a vaccum pump.

the first cam I showed you will have a nice slightly choppy idle and will pull real nice through the 5500 range without killing you on gas

12-15-2006, 08:25 AM	#12
jamon8 Registered User Join Date: Apr 2006 Location: southern Il Posts: 335	Re: need some info on a cam summit has a bunch of cams avaliable http://store.summitracing.com/egnsea...s=P%5FRank%7C0 as we all know summit does not make anything I bought sum-g5000 and I think it was made by crane you can go with a low lobe seperation and have a choppy idle but unless do not have power brakes you will have problems with the amount of vaccum that is nessesary to stop and will have to buy a vaccum pump. the first cam I showed you will have a nice slightly choppy idle and will pull real nice through the 5500 range without killing you on gas Last edited by jamon8; 12-15-2006 at 08:30 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.