Gray Bucket Seat Belts-Centers F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 02-28-2007, 08:51 PM

Not sure of a better title to describe these? They will fit in Blazers, Burbs and probably trucks with buckets. Came from a '90 Burb. Clean with a very small split on either, one split at the top of the passenger belt, 1/4 " and driver's belt has a split on the bottom near the floor mount. Driver's belt has wire harness with good connector for seat belt warning buzzer if desired. Mounting bolts and caps included. If closer pics of splits are needed can do. Not show but a strong 9 + on a 1 - 10 scale. $15 plus shipping.

02-28-2007, 08:51 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Gray Bucket Seat Belts-Centers F/S Not sure of a better title to describe these? They will fit in Blazers, Burbs and probably trucks with buckets. Came from a '90 Burb. Clean with a very small split on either, one split at the top of the passenger belt, 1/4 " and driver's belt has a split on the bottom near the floor mount. Driver's belt has wire harness with good connector for seat belt warning buzzer if desired. Mounting bolts and caps included. If closer pics of splits are needed can do. Not show but a strong 9 + on a 1 - 10 scale. $15 plus shipping. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks Last edited by Ironhorse; 11-06-2007 at 09:53 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.