I made my own shock extenders... Check em out! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jaredm82 · 03-10-2007, 05:40 PM

I never got around to putting shocks on the front of my truck because I am lazy and it required some work. Well I finally got around to it today... I had some doestchs layin around from my 3 5 drop that I got form ccp.com They were too short by about .5" so I got thise idea... Here is the crappy prototype I made first to see if it would even work, next to the stock shock mount....

And here is the finished product all mounted and good to go. Worked out perfectly!

What do you think?

03-10-2007, 05:40 PM	#1
Jaredm82 Active Member Join Date: Jul 2005 Location: Ca Posts: 211	I made my own shock extenders... Check em out! I never got around to putting shocks on the front of my truck because I am lazy and it required some work. Well I finally got around to it today... I had some doestchs layin around from my 3 5 drop that I got form ccp.com They were too short by about .5" so I got thise idea... Here is the crappy prototype I made first to see if it would even work, next to the stock shock mount.... And here is the finished product all mounted and good to go. Worked out perfectly! What do you think? Last edited by Jaredm82; 03-10-2007 at 05:41 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.