67 GMC small back window F/S (Colorado)

[glock35ipsc]

TRUCK HAS BEEN SOLD!!

OK, last attempt to find her a new home, then she is going to scrap! I can get about as much for scrap as I want for it.

SORRY, I'M NOT PARTING IT OUT!! I just simply don't have time for that at the moment, unless Congress can bump us up to 32 hour days!

67 GMC long bed 1/2 ton, small back window, leaf spring rear. 305 V-6, it originally had a TH-400 behind it (no trans right now). I have started the motor to hear it run, it fires right up and sounds good, other than a couple exhaust leaks.

The body is actually pretty decend. Solid metal. Cab corners and rockers are in real good shape. The driver rocker has a dent that can be pulled, but there is little to no rust! Inside floor has some rust at the rocker and kick panels, the usual stuff. Bed has large dents on both sides, can't remember the condition of the steel floor.

The rear end is kinda hosed, it has axles stuck in there to move it around. It will come with a 6-lug 12-bolt 3.73 rear that came out of my 68. It has new brake shoes, new brake hardware kit, new drums and new wheel cylinders. About 200 miles on the brake stuff.

It is missing some brake lines, and I will throw in all the brake lines from my 68 that will have everything needed. Will throw in the driveshaft as well. Has the seat, not the best sahpe but the frame is good. Needs a pass side front fender. Have a better grill and rad support for it.

Last pic - I have a new patch panel that replaces the entire lower front section of the bed (right side) from just above the body line down, wheel well to the front.

Ugly, but worthy! $400 OBO, you pick up. I will deliver locally (50 mile radius) for free. PM me or post here if interested.

Thanks!