rear shock mounting - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**twotrucks** · 04-10-2007, 02:11 PM

Has anyone used the shock relocators from GMC Pauls? I have the relocators installed and now was trying to install my KYB shocks from ECE but the lower shock eye doesn't have a sleeve in the rubber and the kit from GMC Pauls only came with 1/2 bolts and nuts. I am thinking that I need a stud similar if not the same as what is used on the front shock mounting. My questions are
1) should the lower shock eye have a sleeve in the rubber?
2) where to get hardware to finish installation.
Thanks

04-10-2007, 02:11 PM	#1
twotrucks Junior Member Join Date: Jun 2003 Location: Louisville,Ky Posts: 383	rear shock mounting Has anyone used the shock relocators from GMC Pauls? I have the relocators installed and now was trying to install my KYB shocks from ECE but the lower shock eye doesn't have a sleeve in the rubber and the kit from GMC Pauls only came with 1/2 bolts and nuts. I am thinking that I need a stud similar if not the same as what is used on the front shock mounting. My questions are 1) should the lower shock eye have a sleeve in the rubber? 2) where to get hardware to finish installation. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.