LMC Lower control Arm kit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hutch · 05-09-2002, 07:40 AM

Question: LMC offers a control arm set for a 2 1/4 inch front drop.
Has anyone used these on his or her truck?
I know that most folks use the drop spindles but I would like some feedback on these lower control arms. My lower A frames are mismatched and the mounts that bolt to the cross member are in poor condition. The replacement of the mounts looks to me as if they would require new rivets to install and I am not sure how that would be done. Ideally I would like about a 1 to 2 inch front and a 3 to 4 inch rear drop
Thanks in advance

05-09-2002, 07:40 AM	#1
Hutch Registered User Join Date: Oct 2001 Location: Grapevine, Tx. Posts: 2,142	LMC Lower control Arm kit Question: LMC offers a control arm set for a 2 1/4 inch front drop. Has anyone used these on his or her truck? I know that most folks use the drop spindles but I would like some feedback on these lower control arms. My lower A frames are mismatched and the mounts that bolt to the cross member are in poor condition. The replacement of the mounts looks to me as if they would require new rivets to install and I am not sure how that would be done. Ideally I would like about a 1 to 2 inch front and a 3 to 4 inch rear drop Thanks in advance __________________ John Hutchison Grapevine,Texas 68 1/2 t swb 68 Mustang 69 Jaguar 71 1/2 t swb 88 Supra CompTs6m 93 Escort GT 2005 Corolla XRS

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.