Lowered 72' GMC with 20's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dingo_dan_22 · 05-07-2007, 01:40 AM

Just thought I'd share some pics of my uncles truck. The bodywork is almost 12 yrs. old now. He just slapped on some 20's with 255/70r20 in the rear and 255/60r20 in the front. I just sold him some drop springs off the parts truck. He's got 3" drop spindles and 2" drop coils in the front now. He had 4" drop leafs custom made for the rear and he's going to get 5" drop leafs made. The rake is a little too much for me too.

There's no rubbing or clearance problems but he still needs a sway bar so I think I'll get him one off a 73-87 3/4 ton. Should we just bolt the sway bar to the frame or look into the mounts for lowered applications?

05-07-2007, 01:40 AM	#1
dingo_dan_22 Registered User Join Date: Dec 2006 Location: Saskatchewan Posts: 119	Lowered 72' GMC with 20's Just thought I'd share some pics of my uncles truck. The bodywork is almost 12 yrs. old now. He just slapped on some 20's with 255/70r20 in the rear and 255/60r20 in the front. I just sold him some drop springs off the parts truck. He's got 3" drop spindles and 2" drop coils in the front now. He had 4" drop leafs custom made for the rear and he's going to get 5" drop leafs made. The rake is a little too much for me too. There's no rubbing or clearance problems but he still needs a sway bar so I think I'll get him one off a 73-87 3/4 ton. Should we just bolt the sway bar to the frame or look into the mounts for lowered applications? Attached Images __________________ 71' Chevrolet -> 350c.i. w/ 600 Edelbrock Carb, Headers, P/S, 3/5 Drop

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.