05-23-2007, 10:24 PM | #1 |
Junior Member
Join Date: May 2007
Location: Milton, FL
Posts: 64
|
More Brake Questions
Okay, I have been reading this forum, but don't have quite all the answers I am looking for.
I have a 69 with manual drum/drum brakes. I have aquired a crossmember and rearend out of 72 so I can do the disc/drum conversion. My questions are as follows: 1. Can I use any booster and master cyclinder from 67-72 as long as I use the correct proportional valve? 2. I will need to replace the front brakelines from the master cylinder to the front calipers and to the front to rear line. Can I use any 67-72 brake lines or do I need to use 71-72 brakelines. Is there a difference? 3. Am I better off just replacing all brakelines, or can I use the brakeline on the rear axle. 4. I read on another post something about the lever being the correct lenght for the brake booster. How do I know what length I need? I'm sure there are other questions, but I can't think of them now. Keith |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|