Strange noise - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dion · 12-16-2002, 09:15 PM

Some of you may remember when I blew out the rear gears, well we put new gears, carrier bearing and U joints in, now there's this rumble vibration at any speed when I take my foot off the gas and it seems to be getting worse. There's no play in the shaft at all but I had a friend put it through all the gears while I looked under the truck and the shaft moves up and down when it changes gears and when he put it in reverse it really moved. Maybe the wrong carrier bearing? What would be the correct one if so?

12-16-2002, 09:15 PM	#1
dion 72 Cheyenne Join Date: Oct 2001 Location: San Diego Posts: 2,086	Strange noise Some of you may remember when I blew out the rear gears, well we put new gears, carrier bearing and U joints in, now there's this rumble vibration at any speed when I take my foot off the gas and it seems to be getting worse. There's no play in the shaft at all but I had a friend put it through all the gears while I looked under the truck and the shaft moves up and down when it changes gears and when he put it in reverse it really moved. Maybe the wrong carrier bearing? What would be the correct one if so? __________________ Burnout Idle 1972Cheyenne 1966/67Stouts

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.