What's it called? Need help... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68gmsee · 08-09-2007, 05:26 PM

For my 68 GMC with 250 six.

I've been looking all over the internet and all of the vendor parts that I have listed for the cover that goes on the bottom of the bellhousing. This is the sheet metal cover that protects the flywheel, clutch and pressure plate.

I've heard it called flywheel cover or inspection cover, clutch cover or inspection cover, bellhousing inspection cover, etc.. I can't find one for my truck.

I bought one from somewhere about 8 years ago but for the life of me I can't remember where..

08-09-2007, 05:26 PM	#1
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	What's it called? Need help... For my 68 GMC with 250 six. I've been looking all over the internet and all of the vendor parts that I have listed for the cover that goes on the bottom of the bellhousing. This is the sheet metal cover that protects the flywheel, clutch and pressure plate. I've heard it called flywheel cover or inspection cover, clutch cover or inspection cover, bellhousing inspection cover, etc.. I can't find one for my truck. I bought one from somewhere about 8 years ago but for the life of me I can't remember where..

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.