![]() |
![]() |
#1 |
Registered User
Join Date: Jun 2006
Location: Howell, MI
Posts: 37
|
Horn Issue
I posted this yesterday with no pictures, I now have a few to add. Where the wire is coming out of the inside hub is where the contact post goes, I just put a jumper wire in to see if I could get contact between the cover and the wheel.
I have a 68 Step that I am having problems with the horn contact. I think that I have a bastard steering wheel that uses the round Chevy metal cover with a rubber insulator. The wheel I have is 4 spoke (8, 10, 2 and 4 o'clock). The location of the contact post/plunger does not allow a contact to the cap. Even if it did make contact the contact between the cap and steering column is hindered, I ran a wire between the insulated post and the cap to see if it would work, I literally had to push the cap out of the rubber insulator to make horn contact. I bought a conversion kit and that didn't work. Any ideas? Attachment 301321 Attachment 301322 Attachment 301323 Attachment 301324
__________________
GBWatts 68 C10 Stepside LWB Howell, MI Last edited by GBWatts; 09-25-2007 at 10:54 AM. |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|