Starting my engine on the frame only - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Spoof · 10-06-2007, 06:38 PM

I know I should know this stuff...buuuut what do I need to do to fire up my old 350 on the frame. I've got the headers on, HEI dizzy in, fuel pump hose going to a jerry can, starter in, questionable carb on, rad hooked up. I've got it on blocks so it can't take off.
I can think as far as battery to starter...but what about the HEI?
Much like the inside of my engine, I'm a little rusty and I haven't had greasy hands in a while!

10-06-2007, 06:38 PM	#1
Spoof Registered User Join Date: Jul 2000 Location: Victoria,BC, Canada Posts: 1,300	Starting my engine on the frame only I know I should know this stuff...buuuut what do I need to do to fire up my old 350 on the frame. I've got the headers on, HEI dizzy in, fuel pump hose going to a jerry can, starter in, questionable carb on, rad hooked up. I've got it on blocks so it can't take off. I can think as far as battery to starter...but what about the HEI? Much like the inside of my engine, I'm a little rusty and I haven't had greasy hands in a while! __________________ 71 GMC 1500 LWB

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.