New Painless Harness, Few Questions

[muddpile]

Well, I got it in, but now I have a few small issues:
- When I turn the parklights on, the side markers light up, but when I signal they don't flash
-When I turn the parklights on, the front bumper parklights don't turn on, but they flash when I signal or 4 way.
-The interior light won't work at all, with the door switches or the headlight switch. I ran the stock wire from the fusebox to the light, then tapped the white wire into both door switches like the manual said. Did I miss a step somewhere? Both the bulb and the housing are new.
-The wipers only seem to have one speed now. The painless harness has plugs for 4 terminals, but the wiper motor only has 3 on it.
-I have an orange and a white wire for the brakelight switch. Which side goes on the left terminal and which on the right?
-I know where the green and purple wires go on the backup/neutral safety switch, but is does it matter if I mix up the two purples or the two greens, or is it just a straight on/off with no necessary order?

I think it's all pretty minor stuff, but I'd like to get it working correctly. Thanks!