![]() |
![]() |
#23 | |
Junior Member
Join Date: Jul 2006
Location: Delran, NJ
Posts: 458
|
Re: 700r4 install
I use a spreadsheet to calculate engine spd vs. RPM for various combinations of trannys and rear ends, but I never checked 4.11 with a 700r4. Should be OK, seeing as how it's not that much taller than a 3.73. Your cruising RPM at 70-75 would probably be around 2500 RPM or so, which isn't great but is a lot better than your 3-spd. I don't know how it would effect your first gear. Give me your gear ratios and I'll do some calculations.
If you want to stay with the 3-spd, you'd probably be fine with a 3.73 or even a 3.42 depending on your gear ratios. Of course, a synchro would be nice too... Quote:
|
|
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|