|
12-22-2007, 04:25 AM
|
#1 |
|
Java Mechanic
Join Date: Jun 2005
Location: Martinsburg, WV
Posts: 6,763
|
Mix & Match Front End
OK.. so I have a 68 C-20. I am going to be removing the spindles and everything attached to them and replacing them with the spindles from an 83 3/4 ton.
At some point in this process I will be replacing all the bushings and the ball joints. Herein lies my problem -- If I stroll into an Advanced Auto and tell the dude behind the counter that I need ball joints for a 68 C-20 with a 350 and 83 spindles he's either going to argue with me, sell me some pine freshner or have an aneurism. Obviously; in order to protect his health and my sanity I will have to fudge some data. Soooo..... What ball joints do I need for this setup? My best guess is to get the 83 parts and tweak the a-arms as needed but I would apreciate input from someone who has been there. 
__________________
Keith 11 Lincoln MKT -- Momma's wagon 13 G37xS -- middle age crazy car 68 C20 Fleetside -- RIP Decorating the whole town up at a cost of $27 .... |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode