|
05-11-2002, 06:18 PM
|
#1 |
|
Senior Member
 
Join Date: Sep 2001
Location: Seattle, WA, USA
Posts: 5,817
|
+++++++GORDO+++++++
I'm rebuilding that Rochester 2G carb out at my dad's place. I'm having a hell of a time getting the carb off the intake. What I have is two bolts in back that run through the spacer between the carb and the intake, but in the front I just have nuts that thread onto studs! Is this right? Both bolts and nuts are removed, but the carb won't budge. Do the idle needles have to come out first? I can't separate the carb from the spacer until it's off the intake...
...what the hell do I do? ------------------ '69 3/4 ton C20 2wd w/ 350ci/400THM and a wood bed! '69 3/4 ton Custom 20 2wd w/ ORIGINAL 350ci/4sp Manual and a wood bed (parts beast). Seattle, WA. *See pics of my trucks and project at www.webshots.com!
__________________
'69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA. |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode