HELP - driveline question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Travis K · 12-31-2007, 11:36 PM

I have a 72 K-10 that I just swapped a different 350 into. While I was doing this, I also pulled the transmission and transfer case to give everything a good cleaning and to replace all of the fluid and filters. Now that everything is back together the truck will not move in any gear. I have tried every gear on the transmission(TH350), and every gear on the transfer case. I am getting nothing. The torque converter is bolted to the flywheel, and the driveshafts all turn. I also ensured that the parking brake was not stuck. What could be causing this?

12-31-2007, 11:36 PM	#1
Travis K Registered User Join Date: Mar 2007 Location: Bismarck, ND Posts: 81	HELP - driveline question I have a 72 K-10 that I just swapped a different 350 into. While I was doing this, I also pulled the transmission and transfer case to give everything a good cleaning and to replace all of the fluid and filters. Now that everything is back together the truck will not move in any gear. I have tried every gear on the transmission(TH350), and every gear on the transfer case. I am getting nothing. The torque converter is bolted to the flywheel, and the driveshafts all turn. I also ensured that the parking brake was not stuck. What could be causing this?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.