Stepped/dropped A arms - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CG · 02-18-2008, 07:41 AM

People call em different things dropped or stepped.

These are good for about a 2.5 inch drop. You can keep your drums if you use these. Or you can keep your disks. You can also use lower springs with these. But you can not combine these with dropped spindles. If you have drums now you can convert to disks later by just using a stock disk spindle.

These cost 300 dollars plus shipping when I got them. They are heavy. I would have received 50 dollars back if I shipped them the cores. Unfortunately that time period has lapsed and I missed out.

They have never been installed. You can have them for 225 dollars plus shipping. I dont have any way to weigh them here but Im guessing they must be around 30lbs?

02-18-2008, 07:41 AM	#1
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,021	Stepped/dropped A arms People call em different things dropped or stepped. These are good for about a 2.5 inch drop. You can keep your drums if you use these. Or you can keep your disks. You can also use lower springs with these. But you can not combine these with dropped spindles. If you have drums now you can convert to disks later by just using a stock disk spindle. These cost 300 dollars plus shipping when I got them. They are heavy. I would have received 50 dollars back if I shipped them the cores. Unfortunately that time period has lapsed and I missed out. They have never been installed. You can have them for 225 dollars plus shipping. I dont have any way to weigh them here but Im guessing they must be around 30lbs? Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.