Ex rust on my panel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CG · 05-28-2008, 10:14 PM

Some shots of the rust thats been cut off and replaced. One of the lower qtr's was home made out of a flat chunk of metal then screwed and braised on. Next a nice thick coat of bondo for forming like new contours

.

The other one Im posting pics of has over size patch chunks fitted from the rear and welded on the outside. It looks like it has holes that were drilled to pull the metal out, and then everything had a nice thick coat of bondo to smooth out the surface and make that baby factory fresh.

05-28-2008, 10:14 PM	#1
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,021	Ex rust on my panel Some shots of the rust thats been cut off and replaced. One of the lower qtr's was home made out of a flat chunk of metal then screwed and braised on. Next a nice thick coat of bondo for forming like new contours . The other one Im posting pics of has over size patch chunks fitted from the rear and welded on the outside. It looks like it has holes that were drilled to pull the metal out, and then everything had a nice thick coat of bondo to smooth out the surface and make that baby factory fresh. Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.