|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
06-07-2008, 09:13 PM
|
#1 |
|
Registered User
Join Date: Jun 2007
Location: oregon
Posts: 1,069
|
K-20vs C20 bumper brakets
I am trying to fit up a front bumper onto a 69 K-20 . I have no idea what the bumper came off of as far as year. It is the proper one, however ,for a 69 and has no turn signal light holes in it. I also have a set of the long brackets that seem too long. The K frame has some holes through the frame at the spring hanger location. if i mount the hanger there it puts the bumper out way too far. If i bolt the bracket up to the bumper , then the bracket fits up to the frame farther back where there are no holes for mounting. It sure seems there are different brackets involved and that could be my problem. I will take pics tommorow if need be.
Has anyone else experienced this?
__________________
69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears: 
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode