I finally got my radiator so it will stay put

[Chevy Fleetside]

My radiator was not the same as Cheif's. Same brand but bigger with a tranny cooler. I didn't have much of a upper flange to just bolt it to the radiator support. I drilled out the rivets for the lower mounts and used carrage bolts to raise it up about an inch. That brought the top of the radiator left with the top of the support. I didn't get any pictures of that yet. The first picture is just of radiator sitting there. The 2nd picture is the piece of sheetmetal I had bent at my local sheetmetal place for the sum of $7.03. It is galvanized 18 gage. I hope it mixes with aluminum. I am going to paint it anyway. The 3rd picture is what is looks like on the truck.. For about $21 I can have him bend me a piece of Stainless, which I might do...