|
10-14-2008, 02:07 PM
|
#1 |
|
Registered User
Join Date: Jan 2006
Location: Kaufman, Tx
Posts: 827
|
Gear Ratio ??
Wanted to see if any of you know what the standard gear ratio would have been in a '68 one ton dually? The only thing we can read on the spid is a 327ci motor. The rest is illegible.
This truck had a PTO winch on it, not sure if that was factory or not. But it had a 327, with 4spd tranny. We checked the tire rotation method, and came out close to 5:1, then counted teeth on the ring and pinion, and came out to 5.14:1. So we're thinking around a 5.13 gear. Does that seem right? That is an awfully low gear, even for a 1-ton. With a gear like that, all we can see is needing a 100 gallon fuel tank and a government style bail-out every time we drive this thing. Thanks Jay
__________________
You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape. If a hammer doesn't fix it, you have an electrical problem! Slot Cars, 1:24 Scale, 100MPH@100,000RPM, fastest things on wheels! 
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode