DJM 3"/5" Lowering Kit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stllookn · 11-19-2001, 12:59 AM

Anyone install this kit on their truck? It looks really good but when I read the DJM cataloge they also offer control arm and spring combinations. They state in the ad for the control arms that "No cutting, welding or wheel interference problems like you run into with Drop Spindles..." So what did I miss? Does that mean when I buy the DJM 3" drop spindles I will have to cut, weld and reinforce my original control arms and/or worry about wheel interference? I suppose I will have to call them but thought someone here might have already done this.

11-19-2001, 12:59 AM	#1
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	DJM 3"/5" Lowering Kit Anyone install this kit on their truck? It looks really good but when I read the DJM cataloge they also offer control arm and spring combinations. They state in the ad for the control arms that "No cutting, welding or wheel interference problems like you run into with Drop Spindles..." So what did I miss? Does that mean when I buy the DJM 3" drop spindles I will have to cut, weld and reinforce my original control arms and/or worry about wheel interference? I suppose I will have to call them but thought someone here might have already done this. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.