A Bagged question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cparman · 11-05-2008, 07:21 PM

I know absolutly nothing about Baggs, and want to know why I cannot do this. 1972 Blazer 2wd, has someones drop springs in it. sits pretty level when the top is on, but raises a bunch with the top off. I am wondering what would happen if I bagged the back, and ran lines to a air fitting. no compressor, not tank, just baggs, and adjusted the air pressure to set ride height. Kind of like air shocks. I am not into the layin frame thing, just want the 2wd to ride level ---top on, and top off..HOW DO I DO THIS SIMPLY..
thanks in advance

11-05-2008, 07:21 PM	#1
cparman sharp as a marble Join Date: Jan 2007 Location: atlantic beach,florida Posts: 1,082	A Bagged question I know absolutly nothing about Baggs, and want to know why I cannot do this. 1972 Blazer 2wd, has someones drop springs in it. sits pretty level when the top is on, but raises a bunch with the top off. I am wondering what would happen if I bagged the back, and ran lines to a air fitting. no compressor, not tank, just baggs, and adjusted the air pressure to set ride height. Kind of like air shocks. I am not into the layin frame thing, just want the 2wd to ride level ---top on, and top off..HOW DO I DO THIS SIMPLY.. thanks in advance

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.