Looking for a 67-68 Hood and D/S Door - The 1947 - Present Chevrolet & GMC Truck Message Board Network

myoldchevytruck · 11-12-2008, 09:19 AM

Hey All you Florida Folks.

I'm looking for a hood for a 67'-'68 in decent shape. My hood is toast. Every time I slam the hood, rust....lots of rust. I'm also looking for a D/S Door. The PO decided to weld the top hinge (luckily it was welded to the door and not the body).

I live in the Ft. Lauderdale/Miami Area. I'm going to the Turkey Run in Daytona during the Thanksgiving W/E so Orlando/Tampa/Ft. Meyers/Naples or anywhere between to Ft. Lauderdale would be fine.

Pictures and prices would be great. Due to high shipping cost, pickup would be preferred. Thanks, Harry

11-12-2008, 09:19 AM	#1
myoldchevytruck Retired Air Force Veteran Join Date: Aug 2007 Location: Pembroke Pines, Florida 33024 Posts: 1,808	Looking for a 67-68 Hood and D/S Door Hey All you Florida Folks. I'm looking for a hood for a 67'-'68 in decent shape. My hood is toast. Every time I slam the hood, rust....lots of rust. I'm also looking for a D/S Door. The PO decided to weld the top hinge (luckily it was welded to the door and not the body). I live in the Ft. Lauderdale/Miami Area. I'm going to the Turkey Run in Daytona during the Thanksgiving W/E so Orlando/Tampa/Ft. Meyers/Naples or anywhere between to Ft. Lauderdale would be fine. Pictures and prices would be great. Due to high shipping cost, pickup would be preferred. Thanks, Harry __________________ Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors Last edited by myoldchevytruck; 11-12-2008 at 09:44 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.