2 doors and 1 tailgate for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70LonghornCST · 12-20-2008, 08:55 PM

Last year I purchased 2 new doors and 1 tailgate from The Truck Shop in Orange, California. I decided to go OEM, and am willing to sell these at a loss to make room. The tailgate also has a new handle, new latches, and the OEM inners installed...an additional $40 or so in parts.

I paid $350 for the tailgate and $290 for each door ($540 for the set of doors)
This set me back $890.

This is the deal: $550 for all, but you must pick it up. I cannot ship this stuff. The driver side door is still in the box. The tailgate and passenger door were installed and then removed. There was a tiny dimple on the tailgate (came that way in the box) but I repaired it.

If you live in the Central California valley near Modesto, this could be a great deal for you.

12-20-2008, 08:55 PM	#1
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	2 doors and 1 tailgate for sale Last year I purchased 2 new doors and 1 tailgate from The Truck Shop in Orange, California. I decided to go OEM, and am willing to sell these at a loss to make room. The tailgate also has a new handle, new latches, and the OEM inners installed...an additional $40 or so in parts. I paid $350 for the tailgate and $290 for each door ($540 for the set of doors) This set me back $890. This is the deal: $550 for all, but you must pick it up. I cannot ship this stuff. The driver side door is still in the box. The tailgate and passenger door were installed and then removed. There was a tiny dimple on the tailgate (came that way in the box) but I repaired it. If you live in the Central California valley near Modesto, this could be a great deal for you. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal Last edited by 70LonghornCST; 12-20-2008 at 08:57 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.