5.3 4wd swap questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sandking · 01-13-2009, 10:26 PM

I have seen alot of these threads lately, but not in 4wd trucks/Blazers. I have a few questions:

1. Motor mounts. I have seen the mounts available for 2wd, but is the 2wd the same as the 4wd? If not, what are my options? I am leaning on building my own.

2. Headers. What mid length headers work with the motor mounts mentioned above? I can also build my own, but I just cant build them for the price of the Headmans, Hookers, etc.

3. A/C. I will have the compressor on the motor. Right now, my Blazer is heat only. Besides the controls and the condensor, what else do I need to complete my cold air? Is there a kit that will work with my new compressor?

These sound like newbie questions, sorry 'bout that

01-13-2009, 10:26 PM	#1
sandking .....I am working on it..... Join Date: Jul 2007 Location: Anaheim Hills, Ca Posts: 960	5.3 4wd swap questions I have seen alot of these threads lately, but not in 4wd trucks/Blazers. I have a few questions: 1. Motor mounts. I have seen the mounts available for 2wd, but is the 2wd the same as the 4wd? If not, what are my options? I am leaning on building my own. 2. Headers. What mid length headers work with the motor mounts mentioned above? I can also build my own, but I just cant build them for the price of the Headmans, Hookers, etc. 3. A/C. I will have the compressor on the motor. Right now, my Blazer is heat only. Besides the controls and the condensor, what else do I need to complete my cold air? Is there a kit that will work with my new compressor? These sound like newbie questions, sorry 'bout that __________________ . . . . . View my build thread HERE Last edited by sandking; 01-13-2009 at 10:28 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.