FS: Big Block Chevy Milodon Oil Pan Melling Pump & Gasket - $90 plus the ride.

[70cst]

http://store.summitracing.com/egnsea...5&autoview=sku

I bought this off 1968SWBBigBlock and have since decided to not use it on the Circuit Rider so it is up for sell.
Total new from Summitt is over $200.00
*Milodon Oil Pan Part Number MIL-30710 Cost $112.00
*Milodon pick up tube Part Number MIL-18610 Cost $18.00
*Melling part number M77HV Oil Pump Cost $35.00
*Fel-Pro 1884R oil oan gasket Cost $38.00
Oil Pan Gasket, 1-Piece, Rubber/Steel Core, Chevy 1966-90, Big Block

All of these parts are used - the oil pump has about 600 miles on it, the pan, pickup and gasket less than 200 miles
The pan has some scratches but no dents or dings, the oil pump held 64 psi, the pan gasket is a reusable style with a steel core to eliminate over torquing of the pan & gasket, the pickup tube is welded to the pump to keep it from falling off, this is the correct way to install a pump tube & we measured for correct clearance between the bottom of the pan and the pick up prior to welding it..

Info from Summitt
Milodon Stock Replacement Oil Pans
Perfect for restoration projects.
These Milodon oil pans are stock replacements for factory oil pans, and are perfect for restoration projects. They're also perfect for engines that are not intended for racing and just need a new stock-style pan. These American-made pans offer an excellent fit, and flat, un-warped pan rails, unlike imported pans. They feature internal baffling to keep oil in the sump and free up additional horsepower, and are available for most domestic V8 engines.
Oil Pan, Steel, Gold Iridited, 5 qt., Chevy, Big Block

You all know the routine...the 1st I'll take it...gets it.

No pics as its all out in the garage and I don't want to go out and unbox it all. Info can be seen at the Summitt link.
Thanks