Swaybar from a 88 truck on a 87 and below frnt ctrl arm? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Arekusu · 02-05-2009, 07:21 PM

OK, I have a 64 C10 and did the front disk swap. So now it has a 85 control arm and braking system on it. My question is pretty much the title. Can I put the newer 88 and up sway bar on the 87 and below control arm? The 88 and up seems to be a bit bigger in diameter but the bends are a little different and how it mounts to the control arm is also different. Just trying to see if anyone has done it before I venture off to the junk yard. Thanks!

Alex

02-05-2009, 07:21 PM	#1
Arekusu Registered User Join Date: Mar 2008 Location: Arlington, Va. Posts: 335	Swaybar from a 88 truck on a 87 and below frnt ctrl arm? OK, I have a 64 C10 and did the front disk swap. So now it has a 85 control arm and braking system on it. My question is pretty much the title. Can I put the newer 88 and up sway bar on the 87 and below control arm? The 88 and up seems to be a bit bigger in diameter but the bends are a little different and how it mounts to the control arm is also different. Just trying to see if anyone has done it before I venture off to the junk yard. Thanks! Alex

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.