Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
02-24-2009, 06:31 PM | #2 |
'71 chevy s.bed/s.side
Join Date: Mar 2005
Location: Chesapeake, VA
Posts: 1,571
|
Re: windshield washer hoses routing?
The inlet is the larger diameter hose barb and the outlets are the two smaller ones. I did not mark the outlets when I took them off. As far as priming the pump, I connected the hoses and pushed the washer knob a few times and it pumped the fluid very quickly. I did fill the supply hose with washer fluid using a windex bottle, before trying it.
And I rebuilt the old pump with a rebuild kit and could not get it to work-I believe the piston was worn out. Ended up ordering a new ANCO pump (p/n ANC 61-02), made in the USA. Installed it and it worked like a charm!
__________________
STILL PLAYS WITH CARS...AND TRUCKS!! Parents! Be good to your kids...they get to choose your nursing home! 250 I-6 with a 3 speed Saginaw and Borg Warner Overdrive...She's got overdrive! |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|