Master cylinder/brake booster install - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ChvyLvr83 · 04-08-2009, 02:18 PM

So I bought a brand new master cylinder/brake booster assembly from Classic Performance Parts out here in Cali. Looks really nice. I installed it and forgot to bench bleed the master cylinder. Now the Brake pedal is stuck on the floor! Should I remove it and try bench bleeding? Or maybe the linkage isn't at the right position? First time swapping one of these out so any help is definately appreciated. Also, the vacuum lines aren't hooked up as the engine is at the machine shop. Would the vacuum make a difference?

04-08-2009, 02:18 PM	#1
ChvyLvr83 Registered User Join Date: Apr 2009 Location: Los Angeles, CA Posts: 6	Master cylinder/brake booster install So I bought a brand new master cylinder/brake booster assembly from Classic Performance Parts out here in Cali. Looks really nice. I installed it and forgot to bench bleed the master cylinder. Now the Brake pedal is stuck on the floor! Should I remove it and try bench bleeding? Or maybe the linkage isn't at the right position? First time swapping one of these out so any help is definately appreciated. Also, the vacuum lines aren't hooked up as the engine is at the machine shop. Would the vacuum make a difference?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.