|
05-10-2009, 09:44 AM
|
#1 |
|
Registered User
Join Date: Dec 2008
Location: Billings, MT
Posts: 130
|
Sloppy shifter repair
I decided to repair the shifter on my SM 420, I've done the same thing on a LC tranny that had some slop. I removed the old pins, they were very loose, I then tapped the holes for a quarter inch bolt, cut the head off leaving a quarter to 3 eights on the bolt. Put some thread lock on it the screwed them in tightened them up, then cut off the excess. Pic's included.
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode