|
05-14-2009, 06:48 PM
|
#1 |
|
Registered User
Join Date: Mar 2008
Location: Tucson Arizona
Posts: 264
|
Rear Mounted Gas Tank
I know this topic has been beat to death but here's what I did. My truck is a 63 1/2 ton step side. Gas tank that I used is a 16 Gallon Mustang tank. Lowere frame rails had to be cut 1 1/2 inches off each side to allow tank to slide in. I used 1 inch square stock screwed to the top frame rail and secured the tank to that with straps...see photo. All contact areas were rubber covered. Hope this helps..
Bob |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode