ECE track bar and CPP notch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

2500HD · 06-07-2009, 09:55 PM

I installed a CPP bolt in notch on my truck that has an ECE 4-6 drop and adjustable track bar. The track bar hits the frame before the axle hits the bumpers in the notch. I am sure others have had this problem. my options are to add a two inch block and new 4 inch springs or add the two inch block and bags. I will be doing the bags as I planned to bag it later anyway. The bags will be operated with shrader valves for now.

I want bags that will work in the stock spring locations. I do not want to lay anything, I just want a cool stance with the ability to haul stuff.

What bags should I use?

06-07-2009, 09:55 PM	#1
2500HD Registered User Join Date: Aug 2005 Location: DFW Posts: 268	ECE track bar and CPP notch I installed a CPP bolt in notch on my truck that has an ECE 4-6 drop and adjustable track bar. The track bar hits the frame before the axle hits the bumpers in the notch. I am sure others have had this problem. my options are to add a two inch block and new 4 inch springs or add the two inch block and bags. I will be doing the bags as I planned to bag it later anyway. The bags will be operated with shrader valves for now. I want bags that will work in the stock spring locations. I do not want to lay anything, I just want a cool stance with the ability to haul stuff. What bags should I use? Attached Images __________________ 1970 Custom Original 400/400 Now ZZ454/4L80E/Edelbrock Pro-Flo 4/3:73 Eaton Posi PS PB and cold factory air Early Classic 4.5/6 Front 20X8.5 Riddler 4.75 inch bs Pirelli 255/40/20 Rear 20X10 Riddler 5.5 inch bs Toyo 295/40/40 Rear end is original wide 6 lug converted to 5 lug

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.