The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 06-08-2009, 04:35 PM   #1
Rob73-87
Registered User
 
Rob73-87's Avatar
 
Join Date: Feb 2008
Location: Nuremberg, Germany
Posts: 116
5.0 small block -> sluggish pistons ...

Hi everybody,

this time I want to tell you about a problem I had with my new (bored 0.30 over) 305cui motor.
I have collected a bunch of 305cui engines over the past 2 years - nobody did want them - they were cheap and I thought, maybe one day I will be glad to have them in the garage, - who knows ?

Whatever I decided to get one bored over, polished the crank and I brought the stock rods and new speed pro flattop pistons to my nearest machine shop (I habe been there a couple times earlier) and had them installing the new pistons on the old rods (press - fit !!!)
Well, everything went fine at first, but as I got the rods back, I noticed that 2 of them were quite sluggish, - and one piston was so tight on the rod I nearly couldn`t tilt it....
I wanted them to do those 3 pistons again, but they disagreed and told me to put them in - it`ll work ("the pistons will spin themselves free" ???)

Okay - so I installed the engine with the bad feeling, knowing that something might be not "right".

THe result was,- as I tried to break it in, it made a noise and stopped immediately, everytime I varied the rpm a little. Same problem whenn it was hot and I started it again...NOISE and then it was running....hmmm

I decided to take the engine out again, disassembled it, just to find out - those 3 pistons rubbed a little on top of their cylinders, just then, when the pistons stopps and begins to go down in its cylinder...

So WHAT DO YOU THINK ??

I will never again use pressfit pistons, - I will get fullfloating pistons for my 383 engine - I just didn`t want to spend money on new rods for this 5.0.....

Rob73-87 is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:33 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com