The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-02-2009, 02:41 PM   #1
ksbrktracer
TNT-MOTORSPORTS
 
ksbrktracer's Avatar
 
Join Date: Mar 2008
Location: TULSA OKLAHOMA
Posts: 2,692
Lowering my 65 swb

I know it has been asked multiple times, but I am really just asking for opinions...... I have put a complete 87 1/2 ton front crossmember under my truck with 1" rotors. I am using the complete steering linkage, pitman arm, and steering box. I bought a captainfab steering box adaptor (nice product by the way). I have stock spindles on it right now, but planning on putting drop spindles on it soon. I have put ground force 3" springs in the front so far. ( Thanks Cochino ).

I need to buy springs and a track bar for the rear. Any suggestions ????

I am planning on moving the rear trailing arm crossmember back The suggested 1-1/2" to center the rear wheels. ( Already have all the rivets out of it ) Can you move the upper spring mounts or what is everyone else doing???? I have put a 71-72 5-lug rear axle under it. I am thinking 5-6" springs in the rear. I have built a set of 2" steel blocks for the rear. I dont have to use them. I do not know what I can get away with and still be drivable as this is my first 60-66 build .

My other areas of concern are the steering. I want to move the front crossmember forward an 1-1/2" to center the wheels and still use the power steering. Has any one done any of this ???? Should I slide the p.strg bracket forward the 1-1/2" also. What about the Idler arm ? How should I determine the placement of it ?

I realize I have asked quite a bit.....BUT I have figured out that there is enough people on this sight that have done the things I want to do to mine and there is nothing like real world experience. My ultimate goal is to go to a C4 porterbuilt crossmember and bags when I can afford it.....But until then I want to get it drivable. I am installing a 454 and 700r4 with factory A-C and power brakes.

I appreciate all of the help and guidance.......THANK YOU
ksbrktracer is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:34 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com