Attn: Wheel and Tire Pros

[ipaintem]

I am currently building a 71 C10, I will be running Foose Injectors, 20X12 in the rear and 18X8 up front. My question is backspacing. The rear is bagged and C notchec with a 3" mini tub. The front has a Scotts Rod Shop IFS with rack and pinion and McCaughey's 13" big brake kit. No bags, coil overs and dropped spindles. The front track measured from the face of the rotors is 63". Im pretty sure I can get away with running a 335/35 on the back on a 20X12 with 8.5" of back spacing. But the front is where Im stumped. 18X8 with 4.5 back spacing "should" work but I really dont need a $2000. set of end tables. WHat do you guys think?

You can see pics here at my hub garage.
http://http://www.hubgarage.com/mygarage

If the link doesnt work, go to Hubgarage.com and searh JMC Autoworx