09-10-2009, 03:04 PM | #1 |
Registered User
Join Date: Mar 2008
Location: Tullahoma, TN
Posts: 406
|
Sealing Body Seams
I'm fixin to put seam sealer on my seams on the cab. I had to weld in new floor pans inner and outer rockers, floor supports, cab corners, etc.
At the bottom of the door jams you have about a 1/2" gap between the floor and the lip of your outer rocker. It's the lip that the door seals attach to. There is a seam there or a "crack", I guess you could call it, between the floor and the outer rocker panel. The floor is only attached to the outer rocker by 5 or 6 plug welds from the top side and a few stitch welds at the bottom of the rocker underneath. Does this seam get sealed? It looks like it should be, but I don't remember seeing anything there, but then again, mine was rotted away... I think I'm going to seal it. Can't hurt...can it? |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|