09-12-2009, 07:31 PM | #9 |
Registered User
Join Date: Apr 2009
Location: Arvada, Colorado
Posts: 84
|
Re: Tbi swap build thread
Hello again all,
Ok, I am finally going to do the TBI swap into my 4x4. I took it to Mt. Blanca over Labor adn that was the last time for the winter. I have time to finally do the swap. I was going over the parts and forgot where some stuff goes Can you please help me the following: 1)Where does the vacuum tube from the MAP sensor attach to the TBI? 2)Where does the Charcoal Canister hook to the TBI unit 3) Which side of the TBI, Drvier or passanger, is the fuel supply line and which is the return. 4) There is a fitting in the intake located in the intake plenum above the #8 cylinder. It looks like a vacuum hose was attached to it? Do you know where it might go? 5) the vacuum port on the back of the TBI unit labled F. Do you know what goes to this port? Thanks again for all the great information and I am glad to see that this thread is STILL going. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|