UT gauges and blazer parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**SOON2BLAZE** · 10-20-2009, 05:20 PM

67 / 68 gauges both worked when removed from trucks no cracks inscrew holes.
With full gauges 50. shipped

Idiot lights 40. shipped : note pic, gauge panel was in a electric fire

has small cooked plastic area on the back, these are not the gauges that were in the fire. When mounted in dash this is not observable

Blazer wiring harness from fuse panel to top. no cuts, worked when removed 35. shipped

blazer striker plates for the doors and the top 35. shipped

10-20-2009, 05:20 PM	#1
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 906	gauges and blazer parts 67 / 68 gauges both worked when removed from trucks no cracks inscrew holes. With full gauges 50. shipped Idiot lights 40. shipped : note pic, gauge panel was in a electric fire has small cooked plastic area on the back, these are not the gauges that were in the fire. When mounted in dash this is not observable Blazer wiring harness from fuse panel to top. no cuts, worked when removed 35. shipped blazer striker plates for the doors and the top 35. shipped Attached Images Last edited by SOON2BLAZE; 10-25-2009 at 11:50 AM. Reason: pic

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.