![]() |
![]() |
#10 | ||
1 thing at a time is progress.
Join Date: Jun 2007
Location: Ball Ground GA
Posts: 5,511
|
Re: Project Vitamin C-10
Quote:
Quote:
![]() I tried a piece of 18 gauge metal in the 3-1 today. It doesn't like it at all. It wouldn't shear it, but I did get it too bend it. I made it a point to get something done today. I decided to mount the condenser. I used the old cross braces off the core support for this. ![]() With a lot of measuring and head scratching I had a plan. ![]() My first one (drivers side) is not as pretty as my 2nd one. ![]() ![]() All done except for paint. I could finally remove my wood blocks. ![]() ![]() Looking for ideas of where the drier and lines should go HERE. I think the drier should go right behind the grill on front of the core support. I plan on running the lines thru the frame rail back to the cab.
__________________
Alan
Philippians 2:14-16 Last edited by Alan's Classic; 12-12-2009 at 09:27 PM. |
||
![]() |
![]() |
Bookmarks |
Tags |
1959, 1960, 1964, 1965, 1966, c10, hugger, impala, orange |
Thread Tools | |
Display Modes | |
|
|