swapping gauges for non-gauges - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HOGDADDY · 12-13-2009, 11:11 PM

Can I swap my non-gauges to gauges and use same wiring harness. Is the connectors the same for the temp and (electric) oil pressure.
I will buy the correct sending units.

What about the battery gauge, is that wire still present but un-used?

I have a 91 suburban gauge cluster it has a mechanical speedometer hook-up.

The 91 gauge look same on right side (large fuel gauge,speedo)

The oil is in same place, the temp and battery different positions.

Thanks in advance.

12-13-2009, 11:11 PM	#1
HOGDADDY Registered User Join Date: Jul 2006 Location: Alabama Posts: 661	swapping gauges for non-gauges Can I swap my non-gauges to gauges and use same wiring harness. Is the connectors the same for the temp and (electric) oil pressure. I will buy the correct sending units. What about the battery gauge, is that wire still present but un-used? I have a 91 suburban gauge cluster it has a mechanical speedometer hook-up. The 91 gauge look same on right side (large fuel gauge,speedo) The oil is in same place, the temp and battery different positions. Thanks in advance. Last edited by HOGDADDY; 12-14-2009 at 09:26 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.